produce wrinkles and patterns by internal extrusion
The advantages of L102 are: simple process, one-step texturing, stable texture, recycled powder is good to use when spraying.
1. Technical parameters
Item
Parameters
Appearance
White powder (Visual)
Proportion
1.0-1.1
Volatile content [%]
≤0.5%
2. Product Features
● Can be used in epoxy, hybrid, and pure polyester powder coating, which can obtain wrinkles and patterns. ● Obtain wrinkles and patterns by internal extrusion,simple process,one-step texturing,recycled powder is good to use when spraying.
● The size of wrinkles is adjustable, using together with other additives can produce stronger three-dimensional sense.
● Stable quality, safe to use.
3. Dosage & Use method
Dosage 0.1-0.4%.Mixed with other materials and exturde.Texture will be more remarkable with dosage increases,vise versa;More filler,smaller teture,vise versa.
Reference formulation：
Item
Dosage
Remarks
Epoxy
27
Polyester
27
Titanium Dioxide
12
Barium Sulfate
20
Light calcium
15
Low fluidity is good for pattern
L102 Wrinkling Agent
0.3
Main patterning additives
Butyral
0.8
Helpful to avoid threadbare and shrinkage
Organic bentonite
0.2
Stop flow to promote pattern
2-methylimidazole
0.03
Accelerator,stereo stronger
Pigment
moderate
Process: Well mixed and good extrusion is not good for producing such powder coating, on the contrary, wrinkle effect will be better.Therefore, add L102 to mix slowly after other materials mix evenly. Turned off the crushing motor and make sure the extrusion temperature is lower.
4. Similar Products
L101 Floating Agent: Dry blend to produce wrinkle powder, three specifications of coarse, fine and flake.
L104 Specific Floating Agent: Strong three-dimensional sense.It can produce wrinkle even base powder contains leveling.It is suitable for castings, thick workpieces and matt wrinkles. Pay attention to prevent contamination of other powders during use.
